Hollow block (CHB) calculator
In Philippine construction, a concrete hollow block (CHB) wall requires exactly 12.5 blocks per square metre regardless of thickness. For every square metre of 4-inch CHB, you also need 0.522 bags of cement and 0.0435 m³ of sand for laying mortar, plus 0.192 bags of cement and 0.016 m³ of sand per square metre for each plastered face. Standard practice adds a 5% waste allowance, rounding blocks and cement bags up to whole numbers and sand to the nearest half cubic metre.
Calculator
Estimate hollow blocks, cement and sand for your wall. Open the CHB calculator in Countstruct.
How to estimate it
-
Calculate the net wall area
Multiply the wall length by the wall height, and subtract the area of doors and windows:
Net Area = Length × Height − Doors and Windows -
Calculate the block count with waste
Standard Philippine CHB measures 0.40 m long by 0.20 m high including its mortar joint, giving 12.5 blocks per square metre. Add a 5% waste allowance for handling and cuts, rounding up to the nearest whole block:
Blocks = ⌈Net Area × 12.5⌉ + ⌈Count × 5%⌉ -
Calculate laying mortar (cement and sand)
Mortar fills the joints and block cores. The required volume depends on whether you install 4", 6", or 8" thick hollow blocks. Cement is rounded up to whole 40 kg bags, and sand is rounded to the half cubic metre (0.5 m³):
Block Thickness Blocks / m² Cement (40 kg bags / m²) Sand (m³ / m²) 4-inch (10 cm) 12.5 0.522 0.0435 6-inch (15 cm) 12.5 1.018 0.0844 8-inch (20 cm) 12.5 1.500 0.1250 -
Calculate plaster mortar (16 mm per face)
For each face receiving a standard 16 mm plaster finish, multiply the net wall area by 0.192 bags of cement and 0.016 m³ of sand. Plastering both sides doubles these figures (0.384 bags and 0.032 m³ per m² of wall).
-
Calculate reinforcing bars and tie wire
Vertical bars (10 mm or 12 mm) are placed every 0.40 m (2.93 m of bar per m² of wall), 0.60 m (2.13 m/m²), or 0.80 m (1.60 m/m²). Horizontal bars run every 2nd (3.30 m/m²), 3rd (2.15 m/m²), or 4th course (1.72 m/m²). Stock bars are 6 metres long. Tie wire (#16 GI) is budgeted at 0.30 m per crossing, yielding 53 m per kilogram.
Worked example
Consider a 4" CHB wall, 10 m long × 3 m high, with no openings, plastered on both faces, and a 5% waste allowance:
| Item | Formula / Calculation | Commercial Quantity |
|---|---|---|
| Wall Area | 10 m × 3 m | 30 m² |
| 4" Hollow Blocks | 30 × 12.5 = 375 blocks + ⌈375 × 5%⌉ = 19 waste |
394 blocks |
| Laying Cement (40 kg) | 30 × 0.522 = 15.66 bags | 16 bags |
| Laying Sand | 30 × 0.0435 = 1.305 m³ | 1.5 m³ |
| Plaster Cement (both faces) | 30 × 2 × 0.192 = 11.52 bags | 12 bags |
| Plaster Sand (both faces) | 30 × 2 × 0.016 = 0.96 m³ | 1 m³ |
Laying and plastering sand are bought to the half cubic metre. The app prices the result from its regional price book.
What the Countstruct calculator adds
Countstruct CHB Calculator Features
- Choice of 4", 6", or 8" block thicknesses with exact mortar adjustments per Fajardo Table 2-2.
- Plaster choices for unplastered, one face, or both faces, tracked as separate work items.
- Automatic deduction of doors, windows, and structural openings from gross wall areas.
- Integrated vertical and horizontal rebar scheduling cut from commercial 6 m stock bars without offcut assumptions.
- Accurate #16 GI tie wire estimation based on bar crossing intersections.
Questions
Why is the standard factor 12.5 blocks per square metre?
A standard Philippine concrete hollow block is 40 cm (0.40 m) long and 20 cm (0.20 m) high, mortar joints included. One square metre divided by the block area (1.0 ÷ 0.08) yields exactly 12.5 blocks per square metre.
Does the block size change the number of blocks?
No: a wall needs 12.5 blocks per m² for 4", 6" and 8" alike. The size changes the mortar to lay them—0.522 bags of cement and 0.0435 m³ of sand per m² for 4", 1.018 bags and 0.0844 m³ for 6", and 1.500 bags and 0.125 m³ for 8"—and the price.
How much waste should I allow for CHB?
The app offers none, 5, 10 or 15% waste, with 5% as the default to cover handling and cuts.
How is sand ordered for masonry in the Philippines?
Sand is ordered by the cubic metre; the app rounds up to the half m³.