PVC pipe calculator

PVC pipe for houses comes in 3 m lengths. A 40 m run of ½" water line takes 15 pipes with 10% for fittings and cuts, 2 cans of 100 cc solvent cement and 2 rolls of teflon tape. Fittings usually cost about 40% as much as the pipe.

Work it out for your own job

Type the total pipe run and the diameter, and Countstruct counts the pipes, solvent cement, teflon tape and a fittings allowance, priced from its price book.

Open the PVC pipe calculator in Countstruct

How to estimate it

  1. Add up the pipe run

    Measure every straight length of pipe on your plan and add them together. Use ½" to 1" for water supply and 2" to 4" for drains.

  2. Count the pipes

    Add 10% for fittings, offsets and cuts, then divide by the pipe length: 3 m for PVC, or 4 m for PPR hot-and-cold water pipe:

    Pipes = ⌈Run × 1.10 ÷ 3⌉

  3. Count the solvent cement

    Allow about one glued joint per metre. A 100 cc can makes 32 joints at ½", 21 at ¾", 13 at 1", 6 at 2", 4 at 3" and 3 at 4". PPR is joined by heat, so it needs none:

    Cans = ⌈Run × 1 ÷ Joints per can⌉

  4. Add teflon tape and fittings

    Threaded adapters on ½" to 1" water lines are sealed with teflon tape, about one roll per 10 pipes. Elbows, tees, couplings and adapters are budgeted as one lot worth 40% of the pipe cost; count them from your plan for a closer figure:

    Teflon rolls = ⌈Pipes ÷ 10⌉

Worked example

A ½" PVC water line with 40 m of pipe run in total, and a 4" drain line of 12 m.

Material Calculation Quantity to order
½" PVC pipe, 3 m 40 × 1.10 = 44 m ÷ 3 = 14.7 15 pipes
Solvent cement, 100 cc (½") 40 joints ÷ 32 = 1.25 2 cans
Teflon tape 15 ÷ 10 = 1.5 2 rolls
4" PVC pipe, 3 m 12 × 1.10 = 13.2 m ÷ 3 = 4.4 5 pipes
Solvent cement, 100 cc (4") 12 joints ÷ 3 4 cans

Fittings for each line are added as one lot at 40% of what its pipes cost. Drain lines take no teflon tape.

What the Countstruct calculator adds

Countstruct PVC pipe calculator

  • Diameters from ½" to 4", in 3 m PVC or 4 m PPR for water lines.
  • Solvent cement scaled to the pipe size, and teflon tape for threaded water fittings.
  • A fittings allowance priced with the pipe, so the budget is complete before you count every elbow.
  • Prices from a built-in price book you can edit, and the result goes into a project bill of quantities.
Open the PVC pipe calculator in Countstruct

Questions

How long is a PVC pipe in the Philippines?

Standard PVC pipe for houses comes in 3 m lengths. PPR hot-and-cold water pipe comes in 4 m lengths.

What size pipe for water and for drains?

Water lines use ½" (20 mm) to each fixture and ¾" to 1" for the mains. Drains use 2" for sinks and showers and 3" to 4" for toilets and the main sewer line.

How many joints does a can of solvent cement make?

A 100 cc can makes about 32 joints on ½" pipe, 21 on ¾", 13 on 1", 6 on 2", 4 on 3" and 3 on 4". These are scaled from Oatey's figures per quart.

Why is there a 40% fittings allowance?

Elbows, tees, couplings and adapters usually cost about 40% as much as the pipe. The figure comes from a contractor estimating guide; count the fittings from your plan when you have one.